Wavlink releases firmware from time to time to enhance the performance of their networking devices. After the Wavlink extender setup, always keep an eye on these releases and upgrade your device whenever a new upgrade is ready. But what if you are not able to get your Wavlink range extender updated? Well, no need to worry. Follow the easy-to-perform solution to fix the Wavlink extender update failure issue.
Troubleshooting: Wavlink Extender Firmware Not Update
1) Check the Power Supply
The very first thing you need to do to fix the Wavlink extender firmware update problem is to check the power supply. The unstable and faulty power supply is the major cause of why you are unable to finish the firmware update process. To do away with this issue, confirm that your device receives a stable and adequate power supply. Along with that, be sure that the power socket or power cable must be damaged.
2) Check the Internet Connection
Another thing that you need to do is verify the WiFi connection. A low-speed WiFi signal is the next factor for the obstruction in the firmware update process. To troubleshoot this issue, verify the Ethernet port on both wireless devices. Apart from this, contact your Internet service provider to confirm about the internet connection.
3) Restart Your Extender
Try to power cycle your Wavlink range extender once. This can help you in resolve some minor bugs and firmware update issues. If you have no idea how to reboot the extender, use the steps mentioned below:
a. Firstly, disconnect the Wavlink range extender from the home router.
b. After that, turn off the extender and remove it from the wall socket.
c. Wait for a couple of seconds.
d. Now, insert the extender back into the power source.
e. Turn on the power button and wait till the power LED light turns on.
4) Examine the Downloaded Firmware
Just in case, you are trying to upgrade the firmware on your Wavlink range extender manually then check the firmware file that you downloaded earlier. The firmware releases are different for different extender model numbers. On the off chance you have downloaded the incorrect firmware file, then that is the reason why you can not get through the Wavlink range extender firmware update process.
We recommend you to download the right firmware file on your client device again. Once the download is complete, install it on your WiFi extender.
5) Reset the Extender
If nothing has worked in your favor so far, then there is high chance that something serious is happening with your extender. But, do not worry. That serious can be fixed by resetting the range extender to the factory default mode. Always keep in mind the reset process will delete all the custom settings such as network name (SSID), username, and password. If you have no idea how to reset the Wavlink extender then follow the steps listed underneath:
i. First thing first, look for the reset button on the range extender.
ii. As soon as you find it, press or hold it gently using a sharp pointed object such as a paper clip or oil pin.
iii. Wait for a couple of seconds.
iv. Once the LED light starts blinking, release the button.
In this way, you can reset the range extender to its factory default settings in a trouble-free way. That’s it! Now, you have to perform the Wavlink setup process again after the reset process.
The Final Thoughts
Coming across the Wavlink range extender firmware update issue is quite common. But, what matters is how you resolve it. If you take the help of the troubleshooting tips mentioned in this post, you will surely be able to fix it in no time. If you liked reading this article and want others to learn about what you did, do share it with your fellow readers via the comment section.
