Wavlink AC1200 is among those awesome products by Wavlink that is known to cater to the daily internet needs of users. But, not everyone is having a rosy experience using them. The complaints regarding the Wavlink AC1200 not working is multiplying in numbers these days. Are you also an owner of the same extender model? If yes, then walking through the techniques mentioned below will be quite beneficial for you. Know that some of them might require you to access the wifi wavlink com setup URL. Therefore, be ready for the same.
But, before preparing for anything else, you are suggested to have a look at the wall socket that is supplying power to the range extender. It is because if the socket is not capable of supplying fluctuation-free electricity to the extender, then experiencing the non-workability of the extender is the epitome. In case the wall outlet is found damaged, then all you are required to do is get it repaired or use another socket to switch on the range extender. On the off chance, the range extender does not get back to work, consider walking through the techniques given below.
Fixed: Wavlink AC1200 Not Working
Fix 1: Check the Network Traffic
At times, the user connects too many networking devices to the WiFi network of the range extender. As a result, AC1200 starts overworking and very soon loses its tendency to work well. Know that when the network traffic is too much on the extender, its efficiency starts dropping. Thus, you are required to check the incoming traffic to the extender’s WiFi network. In case it is more than the pre-decided value, we suggest you disconnect the additional devices. In case any unauthorized user is found accessing the internet via the AC1200 extender’s WiFi connection, you are suggested to block it from the network of your Wavlink range extender.
Fix 2: Update the Firmware Version
An outdated firmware version of the extender can also be the culprit behind the issue in the discussion. There is a chance that you have not updated the firmware of your extender for a very long time. So, do what is needful and install the latest firmware on your Wavlink AC1200 device by accessing ap.setup or wifi.wavlink.com. However, while you go about the process, make ascertain that the firmware file being uploaded on the extender’s portal belongs to AC1200 only. Apart from this, do not make the mistake of disrupting the firmware update process by turning the extender off or disconnecting it from the main router. The power supply should also be stable during the process.
Fix 3: Strengthen the Extender-Router Connection
The connection between the AC1200 extender and the router also determines the working status of the range extender. It seems that the connection between your WiFi devices has become weak due to which the extender is not working properly. Therefore, consider looking at the same. If they are held together with the help of a LAN cable, be certain that the cable is not damaged. If it is, then you must get the cable replaced with a brand-new one. Additionally, see to it that the cable is connected to the correct ports of your WiFi device. The LAN port of the router and the Internet port of the extender must be used for the connection. Just in case your devices are connected with the help of a wireless source, you are required to pay attention to the distance separating them. It must be optimal.
Fix 4: Power Cycle the Extender
Perhaps, your range extender is demanding some rest due to which it is denying to work appropriately. Thus, we suggest you provide your extender with what it needs. Simply give it a rest of 30-40 minutes. Wondering how to do that? Well, simply switch off the range extender and disconnect it from the power socket. You can also consider disconnecting the router and range extender. Now, wait for the time frame we mentioned earlier. Once done, reconnect the WiFi devices and connect the extender back to the wall socket.
The Final Thoughts
This all can be done if the Wavlink AC1200 extender is not working. We expect that with the help of the techniques discussed above you will be able to address the issue. However, you can rely on the ultimate hack of resetting the extender and reconfiguring it if you want to fix things instantly.
